LANDTEC GEM5000 Operating Manual page 70

OMGEM5KN4.7.1
Upload
Volume flow rate
Warm-up self-test
Warranty
Water trap
Zero
Zero transducers
Page 70 of 70
GEM5000 Gas Analyzer
Terminology used for the movement of data
from the PC via LSGAM software application to
the analyzer.
The volume of a gas that passes through a
given surface per unit of time e.g. m
Pre-determined self-test sequence to test the
analyser functions which takes place after the
analyzer is switched on.
The instrument is under guarantee against
defect in materials and workmanship for a
period of 3 years from the date of shipment to
the operator and is subject to the recommended
service and recalibration requirements.
Device used to protect the instrument from
water or moisture ingress.
The point at which the gas analyzer is calibrated
when there is none of the target gas present.
This option allows the relative pressure
transducer to be zeroed.
3
/hr