Table of Contents
Advertisement
GEM5000 Gas Analyzer
7.4.4 Routes
Using the optional LSGAM Software, you can upload a route. This is a predefined list of
IDs that you can go through in an order. This feature is useful if you have a certain order
to complete your IDS in.
Furthermore if your GA5000 has v1.12 or higher firmware it will strike through your IDs
once you have used them.
Note:
7.4.5 Adjust backlight
This option enables the operator to adjust the backlight (brightness).
Having this set to a darker setting will help preserve the battery power
1) Select 'Key 4 – Adjust Backlight' and the following screen is displayed:
2) Keys 4 and 6 can be used to adjust the brightness of the display screen.
'Manual' disables the backlight timeout.
3) Select the soft-key 'Save' to store the setting or select soft-key 'Exit' to exit the screen
without saving the change.
4) The operator will return to the 'User settings' menu.
If the analyzer is set to "route mode" (v1.12 and above), the filter box
will no longer be there, as you cannot filter in this mode. It will be
replaced by "Route" and the route name.
OMGEM5KN4.7.1
Page 35 of 70
Advertisement
Table of Contents
