Table of Contents
Advertisement
7.
DELIVERY SCOPE
The delivery for a gas-cooled gun includes the following components:
• Kemppi Robot Gun Mount T1
• Operating instructions
• Screwdriver for hexagon-head screws, wrench size 2.5
• Sealing grease, silicone-free, 10 g can
• Certificate of conformity
• Cylinder-head screws, M4×10 (6 pcs.)
The delivery for a water-cooled gun includes the following components:
• Kemppi Robot Gun Mount T1
• Operating instructions
• Certificate of conformity
• Cylinder-head screws, M4×10 (6 pcs.)
For installation of the cable assembly for Robot Gun Mount T1, we recommend a pull-
in tool. It is not included in the scope of delivery and must be ordered separately as an
accessory.
The equipment parts and wear parts are ordered separately.
Order data and ID codes for the equipment parts and wear parts can be found in the
current catalogue. Contact details for advice and for placing orders can be found online at
www.kemppi.com.
© Kemppi Oy 2016
8.
TRANSPORT
The components are carefully checked and packed; however, damage may still occur
during shipping.
Checking procedure on
Check that the shipment is correct by referring to the
shipping note.
receipt of goods
In case of damage
Check the package and components for damage (perform
a visual inspection).
In the event of problems
If the goods have been damaged during transport, contact
the last carrier immediately. Keep the packaging (for
possible checks by the carrier).
Packaging for return of
Use the original packaging and the original packaging
material. If you have questions about the packaging and
the goods
safety during shipment, please consult your supplier.
9.
STORAGE
The physical conditions for storage in a closed room are -10 °C to 55 °C.
9
Robot Gun Mount T1
1616
Advertisement
Table of Contents
