Delivery Scope; Transport; Storage - Kemppi A7 MIG Gun 500-g Operating Manual

7.

DELIVERY SCOPE

The standard scope of delivery for the hose assembly includes the following
components:
• Kink protection on the torch neck side with an integrated switch cover
• Kink protection on the machine side with a central plug
• Operating instructions
For the initial assembly, the following components are required, depending on the
welding task at hand.
• Torch neck (in the preferred size and geometry)
• Mount (required for attachment to the robot)
• Set-up parts and wear parts (ordered separately)
We offer this cable assembly in a gas-cooled version only. Order data and part numbers
can be found in the current Kemppi spare-parts and wear-parts list. For the complete
system, you will require a setting device. It must be ordered separately and depends on
the configuration. The contact information for consulting and ordering can be found
on the Internet, at www.kemppi.com.
© Kemppi Oy 2016
8.

TRANSPORT

The components are carefully checked and packed; however, damage may still occur
during shipping.
Checking procedure on Check that the shipment is correct by referring to the
shipping note.
receipt of goods
In case of damage Check the package and components for damage (perform
a visual inspection).
In the event of problems If the goods have been damaged during transport, contact
the last carrier immediately. Keep the packaging (for
possible checks by the carrier).
Packaging for return of Use the original packaging and the original packaging
materials. If you have questions about the packaging and
the goods
safety during shipment, please consult your supplier.
9.

STORAGE

The appropriate physical conditions for storage in a closed room are 25 °C to 55 °C.
8
A7 MIG Gun 500-g 1616