Table of Contents
Advertisement
6.6.2.4.3 Selecting the connected devices
LCD display in Bluetooth mode – TEN° control panel
Display
The ID of the devices to which a Bluetooth pairing has been established is retained in the control panel. This
means that the connection can also be reestablished automatically:
•
if the wheelchair control unit is switched on again after being switched off,
•
if the external device was switched off and on again,
•
if the wheelchair has been outside the Bluetooth visibility of the external device and then returns to the visible
range again.
6.6.2.4.4 Deactivating devices
1) Select the "Settings" menu by pressing and holding the warning flashers button on the TEN° control panel and
choose the [Bluetooth] item within the menu.
2) Select the device you wish to deactivate from the list of available devices by scrolling (joystick front/back) and
confirm your selection by moving the joystick to the right.
→ The device registration is now displayed with the additional information <Off>. The device can be activated
again in the same manner. A new pairing is not required.
6.6.2.4.5 Operating mouse functions on a PC
Once a connection has been established to the PC, the mouse pointer can be controlled with the wheelchair con
trol unit.
Mouse movements
The mouse pointer moves according to the movements of the input device (e.g. joystick):
•
Mouse movement to the left/right: move joystick at normal speed to the left/right.
•
Mouse movement up/down: move joystick at normal speed front/back.
Mouse actions
Mouse actions (such as clicking, scrolling) can be carried out in two ways depending on the equipment.
a) Mouse actions by moving the joystick quickly and briefly:
•
Left mouse button function (choose selection): move joystick quickly and briefly to the left.
•
Right mouse button function: move joystick quickly and briefly to the right.
•
Scroll upwards: move joystick quickly and briefly to the front.
•
Scroll downwards: move joystick quickly and briefly to the back.
•
Double-click the left mouse button: quickly move the joystick to the left twice in quick succession.
•
Double-click the right mouse button: quickly move the joystick to the right twice in quick succession.
The qualified personnel can also change assignments using individual programming so that e.g. a single joystick
movement is interpreted as a double-click.
b) Mouse actions using external buttons:
Juvo
Information
The pairing is maintained as soon as the Bluetooth connection to the devices has
been established.
The device can be selected by scrolling (joystick front/back).
The selection is confirmed by moving the joystick to the right or left.
After a few seconds, a Bluetooth symbol is continually displayed in blue on the TEN°
screen.
The device can now be operated using the control elements of the wheelchair control
unit (e.g. joystick, special control).
Use
35
Advertisement
Table of Contents
