How To Respond To An Active Supervisory; Hazard Alert; Type Code Displays; If A Supervisory Type Code Displays - Notifier AFC-600 Operating Manual

How to Operate the Control Panel with an Active Supervisory Signal
7$03(5
,I D RU
$/(57
7\SH &RGH
'LVSOD\V
1RWH ,I D ILUH DODUP H[LVWV DQG
WKHUH DUH VLOHQFHG DODUPV WKH
/(' LV OLJKWHG 
$/$50 6,/(1&('
D 6XSHUYLVRU\ DODUP ZLOO UHVRXQG
WKH SDQHO VRXQGHU
683(59,625<
,I D
&RGH 'LVSOD\V
1RWH ,I D ILUH DODUP H[LVWV DQG
WKHUH DUH VLOHQFHG DODUPV WKH
/(' LV OLJKWHG 
$/$50 6,/(1&('
D 6XSHUYLVRU\ DODUP ZLOO UHVRXQG
WKH SDQHO VRXQGHU
AFC-600 Operations PN 51033:A 3/8/99
Technical Manuals Online! - http://www.tech-man.com
+RZWR5HVSRQGWRDQ$FWLYH6XSHUYLVRU\
+$=$5'
A or
TAMPER
panel to normal operation, you must correct the condition causing the tamper, then reset
the control panel. If the control panel indicates an active
following action:
1. Press the
SUPERVISORY
alarms, and supervisory signals. The control panel sends a Supervisory message to
the History buffer and installed printers, terminal mode LCD-80s, and CRT-2s.
2. Correct the condition that activated the supervisory point.
3. When you finish correcting the tamper condition, press the
return the control panel to normal operation (indicated by the "All Systems
Normal" message). The control panel sends an "All Systems Normal" message to
the LCD display, History buffer, and installed printers, terminal mode LCD-80s,
and CRT-2s.
A
7\SH
SUPERVISORY
automatically returns to normal operation, when you correct the condition that activates
the supervisory point. If the control panel indicates an active
the following action:
1. Press the
SUPERVISORY
alarms, and supervisory signals. The control panel sends a Supervisory message to
the History buffer and installed printers, terminal mode LCD-80s, and CRT-2s.
2. Correct the condition that activated the supervisory point.
The control panel automatically returns to normal operation (indicated by the "All
Systems Normal" message) and the control panel sends an "All Systems Normal"
message to the LCD display, History buffer, and installed printers, terminal mode
LCD-80s, and CRT-2s.
+RZWR,QWHUSUHW6XSHUYLVRU\7\SH&RGHV
The Type Code that displays in the Supervisory message indicates the function of the
point that initiates the Supervisory. For example, a monitor module with a
Code means that the monitor module connects to a tamper switch. Table 7 contains a
list of the Type Codes that can appear in an Supervisory message.
Type Code
SUPERVISORY
(non-latching)
TAMPER
(latching)

HAZARD ALERT

(latching)
Type Code latches the control panel. To return the control
HAZARD ALERT
/ key to silence the panel sounder and switch the
ACKNOWLEDGE STEP
LED from flashing to steady—regardless of the number of troubles,
Type Code does not latch the control panel. The control panel
/ key to silence the panel sounder and switch the
ACKNOWLEDGE STEP
LED from flashing to steady—regardless of the number of troubles,
7DEOH  6XSHUYLVRU\ 7\SH &RGHV
Purpose
Activates a Supervisory alarm when a
device, such as a waterflow valve
opens.
Activates a Supervisory alarm when a
tamper condition, such an open door
condition occurs.
Activates when a device that monitors
critical functions
 +RZ WR 2SHUDWH WKH &RQWURO 3DQHO
point, take the
TAMPER
SYSTEM RESET
point, take
SUPERVISORY
TAMPER
What if does
Lights LED and
SUPERVISORY
activates CBE
Lights LED and
SUPERVISORY
activates CBE
Lights LED and
SUPERVISORY
activates CBE
key to
Type
25