How To Operate The Fft-7 And Fft-7S; Installation Requirements; How To Page (Fft-7 Only); How To Answer A Call - Notifier AFC-600 Operating Manual

 9RLFH $ODUP 6\VWHPV
,QVWDOODWLRQ
5HTXLUHPHQWV
+RZ WR 3DJH
))7 RQO\
+RZ WR $QVZHU D &DOO
64
Technical Manuals Online! - http://www.tech-man.com
+RZWR2SHUDWHWKH))7DQG))76
An FFT-7 will not operate unless:
• You connect Power to the FFT-7
• You connect the control harness between the AMG-1 and the FFT-7
• You set the AMG-1 or EIA-485 communication through the CPU ACS port (TB4)
For instructions on making these connections, refer to the AFC-600 Installation
Manual.
To page through the FFT-7, follow these instructions:
1. Make sure the
ON LINE
2. Pick up the telephone handset.
3. Press the button (the
PAGE
4. Speak into the telephone handset.
5. When finished paging, press the
and hang up the telephone handset.
To answer a call with an FFT-7, follow these instructions:
1. When the VCM-4 sounder produces a pulsing tone and the telephone circuit green
LED flashes, pick up the telephone handset.
2. Press the VCM-4 telephone circuit's switch associated with the flashing LED.
3. Speak into the telephone headset.
4. When finished with the conversation, hang up the telephone handset.
Fire Fighter's Telephones (FFT-7 and FFT-7S)
green LED is on.
green LED goes on).
PAGE MODE
button (the
PAGE PAGE MODE
AFC-600 Operations PN 51033:A 3/8/99
green LED goes out)