Horizontal Commands - Rigol DS1000 Series Programming Manual

RIGOL

Horizontal Commands

Horizontal Commands set the Horizontal Scale (time base) and the waveform
horizontal position in the memory (trigger offset). The waveform will enlarge or
shrink when the horizontal Scale changed.
Horizontal Commands include:
:TIMebase:MODE

:TIMebase[:DELayed]:OFFSet

:TIMebase[:DELayed]:SCALe

:TIMebase:FORMat

We will give specific explanations for each command in the following part.
2-44
Programming Guide for DS1000/DS1000CA Series
© 2008 RIGOL Technologies, Inc.