Programming
Operating Instructions 512/532 - 04.0 - 08/2016
5.24.2 Loading seam appearances
1.
Switch on the controller.
The current software version is briefly shown in the display.
2.
Plug in the USB stick.
3.
Press the USB button and wait approx. 3 seconds.
4.
Press the Memory button.
5.
Press the P5 button.
The download into the controller starts. Duration is approx.
4 min.
6.
Press the Reset button.
7.
Pull out the USB stick.
The software transfer is complete.
5.24.3 Setting parameter U085 (Class 532)
With the button sewing machine, the parameter U085 must be set
after loading new software.
Prerequisite:
• Machine is in programming mode, Ready button LED is off.
1.
Press and hold the Memory button for 6 s.
The button LED illuminates.
2.
Use the +/– Program buttons to set parameter number U085.
3.
Press the Ready button.
4.
Use the +/– Function buttons to enter a function value of 1.
5.
Press the Select button.
59