Table of Contents
Advertisement
Random Binary Pattern is 16 characters in length and contain random binary data.
Packet Size
Packet Size shows the number of data bytes in each packet (described in Pattern Descriptions above).
# of Packets
# of Packets shows the number of packets in each transmission.
Packet Delay
Packet Delay shows the amount of time (in seconds) to delay between each packet transmission (range is from
0.00 to 30.00 seconds in 0.25 second intervals).
COM Port
COM Port allows the user to select which COM port (Primary or Secondary) is used for transmitting data.
3.4.20 PING TEST
For user convenience, the PING Test was added to the Integra FPS as a utility and is used to simulate a Host/Remote polling
environment. The Master sends out a packet to the Remote and the Remote replies to the Master with the same packet
information. This utility is useful for testing Ethernet and modem links.
Figure 39 - Ping Test Screen
Remote
Remote displays the IP Address of the device under test.
Minimum Time
Integra-TR User Manual
Page | 60
Advertisement
Table of Contents
