Figure 6 - Point-to-Multipoint System (full-duplex)
Figure 7 - Point-to-Multipoint System (full-duplex repeater)
2.8.6 EXTENDING A LANDLINE (TAIL CIRCUIT)
Integra-TR may be used to extend a landline circuit (giving access to difficult locations, etc.). This type of connection is
called a "tail circuit" and is shown in Figure 8. The tail circuit assembly may be used in any of the network types described in
the preceding sections.
Figure 8 - Landline (Tail Circuit)
Note: The line modems should be full-duplex units.
Integra-TR User Manual
Page | 15