Diagnostic Ids And Alarms - CalAmp INTEGRA-TR User Manual

Time is the time stamp when the diagnostics were received.
Filter
Filter allows the user to filter Short IDs. The following options are available:

Off (All IDs): no IDs are filtered out.

ID List: only the IDs in the Filter ID List are shown.

Selected ID: only the selected ID in the Filter ID List is shown.
Display
Display allows the user to format on screen data. The following options are available:

Scroll (by time): displays the diagnostics as they are received.

Slotted (by ID): sorts the diagnostics by Short ID. Using this option, each Short ID will have one row of diagnostics,
showing the most recent.
Progress
The Progress panel shows the sorting progress of the diagnostics if a filter was changed.
Local ID
The Local ID is the Short ID of the unit interfaced with the PC.
Filter ID List
Filter ID List is a listing of Remote IDs setup in the Diagnostic IDs and Alarms Screen. This list is used for selecting a filter.
Pause
The Pause button allows the user to pause the reception of the diagnostics for scrolling through the grid.
Clear
The Clear button allows the user to clear the display and current Online Diagnostics.
Save
The Save button allows the user to save the current Online Diagnostics to a file. A maximum of 4096 lines of data can be
saved.

3.4.16 DIAGNOSTIC IDS AND ALARMS

The Diagnostics IDs and Alarms utility is accessed from the Utilities pull-down menu. The Diagnostics IDs and Alarms screen
allows the user to set up the ID List for use with the Offline Link Test, and Offline and Online Diagnostics as well as Alarms
for use with Online Diagnostics.
Figure 35 - Diagnostic IDs and Alarms Screen
Integra-TR User Manual Page | 52