CalAmp INTEGRA-TR User Manual page 53

ID Entry and List
ID Entry: Allows the user to add Short IDs to the ID List. The range of this field is 1 to 1023 (ID 255 is reserved). A Short ID is
added to the ID list by hitting Enter or by pressing the Add ID button.
ID List: Allows the user to select a Short ID from the list to delete. A Short ID is deleted from the list by pressing the Delete
ID button.
IP Address:
IP Address allows the user to receive diagnostics through a serial to Ethernet converter with this IP Address. Default allows
the user to select a default unit for the diagnostics when received through a serial to Ethernet converter.
Alarms for Online Diagnostics
Alarm indications are available with Online Diagnostics. When Online Diagnostics are received and a diagnostic field falls
outside the Alarm limits, a "<" character will designate a value less than the low Alarm and a ">" character will designate a
value greater than the High Alarm (See Figure 35).
Low/High RSSI: Low/High RSSI represent the low and high limits for the RSSI diagnostics (in dBm).
Low/High Temp: The Low/High Temp represents the low and high limits for the temperature diagnostics (in degrees C).
Low/High Batt: Low/High Batt represents the low and high limits for the battery voltage diagnostics (in volts).
Low/High Fwd Pwr: Low/High Pwr represents the low and high limits for the forward power diagnostics (in watts).
Open
The Open button allows the user to load Diagnostic IDs and Alarms from a previously saved file.
Save
The Save button allows the user to save the current Diagnostic IDs and Alarms to the current file.
Save As
Integra-TR User Manual Page | 53