Table 12 - Normal Factory Settings (Bases) - CalAmp INTEGRA-TR User Manual

Table 12 - Normal Factory Settings (Bases)

Fields
Network Settings
Station ID (CWID)
Compatibility Mode
Extended Preamble (ms)
Network Speed
Tx Online Diagnostics
Unit Type
Data Delivery
Activity Time-out (sec)
COM Port
Device Baud
Data fwd timer
Xmit Control
DCD Control
External I/O Connector
Frequency
Transmit
Receive
Adjustments
Carrier Sense (-dBm)
Tx Time Out
Disable Tx w/Carrier Present
Tx Power
Transceiver Type
Refer to help files (See section 3.5) for descriptions of the above fields.
Full Duplex Base Integra-TR with other
Integra-TR
RX Unit
Disabled (OFF)
Integra-TR
5 mS
19200 Full Channel 9600 Half Channel
2400 Quarter Channel
Yes
Master
All
5
19200 / 9600 / 2400
Normal
Parity 8 bit, no parity, 1 stop bit
Break Ignore break
DOX
Switched
I/O 1 Input Output
I/O 2 RxTp
User Choice
User Choice
105 (116 for
quarter-channel)
Disabled
Disabled (OFF)
255 (indicates 5 watts nominal)
Rx Only
Redundant Integra-TR Full Duplex
Base with Integra-TR/Integra-T
TX Unit RX Units
Integra-T / TR
0 mS
9600 Full Channel
9600
Fan Control Input Output
Input RxTp
(N/A) 110
Tx Only Rx Only
Integra-TR User Manual
TX Units
Fan Control
Ant. SW Control
(N/A)
Tx Only
Page | 68