Table of Contents
Advertisement
Bytes Transmitted shows the number of bytes (characters) transmitted since the port was last opened.
Bytes Rx'ed
Bytes Received shows the number of bytes (characters) received since the port was last opened.
Framing Errors
Framing Errors shows the number of Framing Errors received since the port was last opened.
3.4.13 OFFLINE LINK TEST
The Offline Link Test utility is accessed from the Utilities pull-down menu. The Offline Link Test is used to test the link
between two units: the local unit interfaced to the computer and a remote unit. Blocks of data are transmitted to the
remote unit and the remote unit decodes and returns them. The transmitted and received blocks of data are compared and
the ratio of the results is calculated. NOTE: An Offline Link Test requires suspension of user network operation.
Local ID
The Local ID is the Short ID of the unit connected to the computer.
Remote ID
The Remote ID combo box allows selection of the unit (by choosing its Remote ID) from which the Link Test information is
gathered. Remote IDs are set up in the Diagnostic IDs and Alarms Screen.
Figure 32 - Offline Link Test Screen
Integra-TR User Manual
Page | 46
Advertisement
Table of Contents
