Hardware Installation
The installation procedure for an add-on module to a MAG 8000 transmitter is as follows:
1. Loosen screws on transmitter top.
2. Remove transmitter top using a screwdriver.
3. Dispose of silica gel bag.
4. Mount the modules on the backside of the MAG 8000 electronics.
Image 3-1
5. Use the two supplied 3 mm screws and washers to fix the module to the MAG 8000
electronics.
MAG 8000 Modbus RTU
Operating Instructions, 04/2016, A5E03409989-AB
Hardware installation
3
11