Installation And Startup; Installation Of The Hardware - Siemens SINAMICS V90 Application Description

4 Installation and Startup

4.1 Installation of the hardware

Installation and Startup
4
4.1 Installation of the hardware
The figure 4-1 shows a possible hardware configuration of the application with a 3
phase 220V net and an additional 24V power supply.
Wrong wiring can damage the drive.
CAUTION
In this application, the 1AC 220V power supply and one external DC24V power
supply are used. The 1AC 220V is used for the main power supply of the drive
and the external DC24V is used for the control power supply of the drive and the
power supply of the PLC.
L1
L2
L3
N
PE
L+
M
Figure 4-1
Speed control with SINAMICS V90 and S7-300 via Profinet
Entry-ID: 109743898, V1.0,
L1 L2 +24V M PE
SINAMICS V90 PN
U V W PN PN
M
07/2016
L+ M PE
SIMATIC S7-300
CPU 315F-2DP/PN
PN
15