Power Control; A.10 Power Control - Siemens SITRANS F Operating Instructions Manual

Modbus holding registers

A.10 Power control

Modbus Data type /
register
Size [bytes]
4:3017 uint16 / 2
4:0050 date / 6
A.10

Power control

Table A- 11 Power control
Modbus Data type /
register
Size [bytes]
4:0368 uint8 / 1
4:3030 uint8 / 1
56
Parameter Description
Fault status 2 bytes describing which er-
rors/warnings are active
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Date of fault log reset Date of fault log reset
Parameter Description
Mains frequency Country related mains power
frequency for enabling correct
noise filtering
•
•
Power supply Meter power supply source
•
•
Bit 1: Insulation error
Bit 2: Coil current error
Bit 3: Preamplifier overload
Bit 4: Database checksum
error
Bit 5: Low power warning
Bit 6: Flow overload warning
Bit 7: Pulse A overload warning
Bit 8: Pulse B overload warning
Bit 9: Consumption interval
warning
Bit 10/L: Leakage warning
Bit 11/E: Empty pipe warning
Bit 12/C: Low impedance
warning
Bit 13/d: Flow limit warning
Bit 14/A: Reverse flow warning
Bit 15: Not used
Bit 16: Not used
0 = 50 Hz
1 = 60 Hz
0 = Battery
1 = Mains supply
Operating Instructions, 04/2016, A5E03409989-AB
Default value Access level
[unit] /
Value range
- [-] Read Only
- [-] Read Only
Default value Access level
[unit] /
Value range
- [-] Read Only
1)
- [-] Read Only
MAG 8000 Modbus RTU