Cisco IP Phone Web Page
Parameter
Call Pickup Tone
Distinctive Ring Patterns
Parameter
Cadence 1
Cadence 2
Cadence 3
Cadence 4
Cadence 5
Cadence 6
Cadence 7
Cadence 8
Cadence 9
Control Timer Values (sec)
Parameter
Reorder Delay
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
236
Description
Provides the ability to configure an audio indication for call pickup.
Description
Cadence script for distinctive ring 1.
Defaults to 60(2/4).
Cadence script for distinctive ring 2.
Defaults to 60(.3/.2, 1/.2,.3/4).
Cadence script for distinctive ring 3.
Defaults to 60(.8/.4,.8/4).
Cadence script for distinctive ring 4.
Defaults to 60(.4/.2,.3/.2,.8/4).
Cadence script for distinctive ring 5.
Defaults to 60(.2/.2,.2/.2,.2/.2,1/4).
Cadence script for distinctive ring 6.
Defaults to 60(.2/.4,.2/.4,.2/4).
Cadence script for distinctive ring 7.
Defaults to 60(4.5/4).
Cadence script for distinctive ring 8.
Defaults to 60(0.25/9.75)
Cadence script for distinctive ring 9.
Defaults to 60(.4/.2,.4/2).
Description
Delay after far end hangs up before reorder (busy) tone is played. 0 =
plays immediately, inf = never plays. Range: 0–255 seconds. Set to 255
to return the phone immediately to on-hook status and to not play the
tone.