Ipv6 Settings - Cisco 8851 Administration Manual

IPv6 Settings

Parameter
Connection Type
Static IP
Prefix Length
Gateway
Primary DNS
Secondary DNS
Broadcast Echo
Auto Config
802.1X Authentication
Parameter
Enable 802.1X Authentication
Optional Network Configuration
Parameter
Host Name
Domain
Description
Internet connection type that is configured for the phone. Options are
DHCP and Static IP.
Default: DHCP
IPv6 address of the phone.
Identifies number of bits of a global unicast IPv6 address that are part
of`the network. For example, if the IPv6 address is
2001:0DB8:0000:000b::/64, the number 64 identifies that the first 64
bits are part of the network.
IP address of the gateway.
Primary Domain Name Server (DNS) assigned to the phone.
Secondary Domain Name Server (DNS) if assigned to the phone.
Options are Disabled and Enabled.
Default: Disabled
When enabled, phone generates an IPv6 address by default with the
prefix length sent from the router. Options are Disabled and Enabled.
Default: Enabled
Description
Enables/disables 802.1X
Default: No
Description
The hostname of the Cisco IP Phone.
The network domain of the Cisco IP Phone.
If you are using LDAP, see LDAP Configuration, on page
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Cisco IP Phone Web Page
189.
217