Cisco IP Phone Status
You can also obtain much of this information, and obtain other related information, remotely through the
phone web page.
Display the Phone Information Window
Procedure
Step 1
Press Applications
Step 2
Select Status > Product Information.
When a user password is set, a corresponding icon (lock or certificate) displays at the top-right corner of the
phone screen.
Step 3
To exit the Model Information screen, press
View the Phone Status
Procedure
Step 1
Press Applications
Step 2
Select Status > Phone Status > Phone Status.
You can view the following information:
• Elapsed time—Total time elapsed since the last reboot of the system
• Tx (Packets)—Transmitted packets from the phone.
• Rx (Packets)—Received packets from the phone.
View the Status Messages on the Phone
Procedure
Step 1
Press Applications
Step 2
Select Status > Status messages.
You can view a log of the various phone statuses since provisioning was last done.
Note
Step 3
Press Back
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
196
.
.
.
Status messages reflect UTC time and are not affected by the timezone settings on the
phone.
.
.