Key Cabinet Alarm; Key Cabinet Opened Before A Fire Alarm - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: -
16.4
16.4.1
 If an ext. FBP with a built-in printer (1826) is connected, the
printer will print
*** Heavy smoke ***
ZONE-ADDR: 12-45
Alarm text for 12-45
or
*** Heavy smoke ***
ZONE: 14
Alarm text for zone 12
*** Heavy heat ***
ZONE-ADDR: 12-45
Alarm text for 12-45
or
*** Heavy heat ***
ZONE: 14
Alarm text for zone 14
Heavy smoke / heat alarm will be reset when the fire alarm
respectively is reset, see chapter "Alarm reset", page 53.

Key cabinet alarm

One programmable input
The fire brigade uses a key cabinet to store a key to the building.
A key cabinet alarm is like a normal fire alarm, i.e. outputs with
trigger condition "General fire alarm" will be activated.

Key cabinet opened before a fire alarm

If the key cabinet is opened before a fire alarm (e.g. if somebody
illegally breaks into the key cabinet), a key cabinet alarm, i.e. a "fire
alarm" will be generated.
Example; Key cabinet alarm:
ZONE: KE
Alarm from key cabinet
It will be printed like a normal fire alarm if an ext. FBP with printer is
available, see chapter "Fire alarm", page 42.
Key cabinet alarm is reset like a normal fire alarm, see chapter "Fire
alarm reset, page 53.
46
General heavy smoke / heat alarm and individual alarm points / zones.
47
The alarms will be printed like they are presented in the display, i.e. as
ZONE-ADDR or ZONE.
48
Input I0 or COM loop I/O unit 3361 can be used.
50
EBL128 Operating Instructions V2.0.x
47
each heavy smoke / heat alarm, e.g.:
Time HH.MM
Time HH.MM Date MM-DD
Time HH.MM
Time HH.MM Date MM-DD
48
can be used to connect a key cabinet.
Date MM-DD
Date MM-DD
No. 01