Sensors Activating Service Signal (H4/U4) - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623
27.4
Action
"Access"
Scroll to menu H4.
"A"
Scroll to menu U4.
"A"
"Return"
"Return"
Rev: -

Sensors activating SERVICE signal (H4/U4)

Service signal is indicated by LED "Service" (L12).
average sensor value is over the service level respectively for one or
more sensors. (Regarding the service signal levels, see Planning
Instructions, chapter "Service signal".
Menu H4/U4 is a list of the sensor(s) activating service signal.
NOTE! Service signal is only information that a sensor has to be
replaced soon. The service signal has to be acknowledged, see chapter
"Acknowledge SERVICE signal (H8/S4)", page 129.
If there are no sensors activating service signal,
--- List is empty --- will be shown.
Text in display
Present system status
Disablement
Sensors activating SERVICE signal
Sensor : ZZ-AA (technical address aaa)
needs service
Sensors activating SERVICE signal
Present system status
EBL128 Operating Instructions V2.0.x
ACCEPT? H4
ACCEPT? U1
ACCEPT? U4
ACCEPT? U4
ACCEPT? H4
107
The week
Comments
According to chapter
"Access", see page 81.
Press "A" to accept.
L = a list in which you
L
can scroll. If there are no
sensors activating service
signal,
--- List is empty ---
will be shown.
Scroll or press "Return"
to menu H4.
Scroll or press "Return".