Access - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623
23
Action

"Access"

Step with -> to the
wanted alternative and
press "A"
or
press "0", "1", ... "8" or
"9" and "A"
Rev: -
Access
To use the key pad in EBL128 (to get access to the menu tree), it is
necessary to log in with a User name and Password for level 2B, 2C or
3A.
See also chapter "User level, User name & Password", page 23.
Open the EBL128 door (= level 2A), press the "Access" button (P8)
and continue as follows:
Text in display
Log in as:
0: Information only
Password: 
NO ACCESS!
Perform monthly test
Explanations, to the table column headings:
68
0: Information only (level 2B), 1: Building officer (level 2C) and 2:
Service personnel (level 3A) are default in EBLWin. For safety reasons they
are recommended to be changed and others to be added, i.e. after SSD
download there might be up to ten (0-9) log in alternatives available.
EBL128 Operating Instructions V2.0.x
ACCEPT? H1
81
Comments
Before SSD download
->
only "0" is required to log
in and get access to all the
menus.
After SSD download the
settings done via EBLWin
will be valid, i.e. up to ten
(0-9) log in alternatives
68
might be available.
The digits are replaced
() in the display.
Wrong password was
entered. Try again.
NOTE! After three wrong
passwords the log in
function will be blocked
for one hour for the user
name respectively.
Correct password was
entered. Menu H1 is
shown. Press "A" to accept
(i.e. to perform a monthly
test) or scroll / jump to
another menu (H2-H10).
: