User Level, User Name & Password - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: -
7 User level, User name & Password
EBL128 has different user levels for different kind of users.
To log on to an EBL128 (version > 2.0) a User name and a Password
are required (see page 81). Ten different User names with individual
Passwords can be used. Each User name is for a specific user level,
which has access to specific menus according to the following table.
User level User level name /
according type
to EN54-2
1 -
2A -
2B Information only
2C Building officer
3A Service personnel
3B -
4 -
a)
Information only, i.e. the faults cannot be acknowledged.
b)
Menu H9/C1 only.
Via EBLWin (menu "System") are ten different User names with
individual Passwords possible to define in the "User data" dialog box.
They can be used to log on to an EBL128 (version > 2.0) and/or Web-
server access. Three User names and Passwords are default:
NOTE! Initials are required in system EBL128 since they will be
used in the event log instead of the User names.
23
EBL128 Operating Instructions V2.0.x
Required action /
equipment
No. (Hole in the
Plexiglas.)
Fire brigade key. (To
open the door.)
Like 2A + log on as
"Information only"
Like 2A + log on as
"Building officer"
Like 2A + log on as
"Service personnel"
PC + EBLWin + H/W
key
PC + EBLWin + H/W
key + special password
Access to
Alarms queued
button.
Like 1 + Silence
buzzer, Silence
alarm devices &
Reset buttons.
Like 2A + keypad.
a)
Menu H4, H6 ,
b)
H9 & H10
Like 2A + keypad.
H1-H4, H6, H7,
H9 & H10
Like 2A + keypad.
H1-H10
SSD & S/W
download
SSD & S/W
download + reset
of alarm counter.