Re-Enable All Control, Ventil, Exting Or Interlocking Outputs (H2/B8) - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623
25.8
Action
"Access"
Scroll to menu H2.
"A"
Scroll to menu B8.
"A"
Press 1
"A"
"Return"
"Return"
Rev: -
Re-enable all control, ventil, exting or
interlocking outputs (H2/B8)
Disabled outputs are listed in menu H4/U1.
When all outputs have been re-enabled, the LED "Disablements" (L8)
will be turned OFF, if there are no other disablements.
If there is nothing to re-enable, --- List is empty --- will be
shown.
Text in display
Disable or re-enable
Disable zone
Re-enable all control, ventil, exting
or interlocking outputs
Re-enable type:0 0=Control 1=Ventilation
2=Exting 3=Interlocking
Or, e.g. if only type 1 is disabled:
Re-enable type:0
--- List is empty ---
Re-enable all control, ventil, exting
or interlocking outputs
Disable or re-enable
EBL128 Operating Instructions V2.0.x
ACCEPT? H2
ACCEPT? B1
ACCEPT? B8
ACCEPT?
1=Ventilation
ACCEPT?
ACCEPT? B8
ACCEPT? H2
95
Comments
According to chapter
"Access", see page 81.
Only disabled type(s) will
be shown. Press:
"0"=control output
"1"=extinguishing output
"2"=ventilation output
"3"=interlocking output.
Press "A" to accept.
All types are re-enabled.
Scroll or press "Return" to
menu H2.
Scroll or press "Return".