Icom iM323 Instruction Manual page 54

7
DSC OPERATION
Transmitting a Test Acknowledgement call (continued)
D
Manual ACK:
Enter "TEST ACK" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU])
• If no Test call has been received, the "Test ACK" item will not be
displayed.
•Push [EXIT] to return to the normal operating mode.
•Push [BACK] to return to the previous screen.
Select a desired Test call to reply to, using Dial or [
w
then push Dial or [ENT].
44
➪ Test ACK
(Rotate Dial, then push [ENT].)
The Test ACK confirmation screen is displayed.
e
Push [CALL] to transmit the acknowledgement call.
While transmitting the acknowledgement call, the screen
r
shown below is displayed, and then returns to the normal
operating mode.
Y]/[Z],