Dsc Settings - Icom iM323 Instruction Manual

DSC Settings

■
D Position Input (See page 22)
D Add Individual ID/Group ID (See pages 19, 20)
D Delete Individual ID/Group ID (See page 21)
Automatic Acknowledgement
D
These items set the Automatic Acknowledgement function to
"Auto TX" or "Manual TX."
When an Individual, Position Request, Polling Request or
Test Call is received, the transceiver automatically transmits
an Individual Acknowledgement, Position Reply, Polling Re-
ply or Test Acknowledgement Call, respectively.
When "INDIVIDUAL ACK" is set to "Auto TX," the trans-
ceiver automatically transmits the Acknowledgment call
including "Unable to Comply" (No Reason Given) after re-
ceiving the Individual call.
Enter either "INDIVIDUAL ACK," "POSITION ACK" or
q
"TEST ACK" in the DSC Settings menu.
➪ DSC Settings
MENU
(Push [MENU]) (Rotate Dial, then push [ENT].)
➪ DSC Settings
MENU
➪ DSC Settings
MENU
➪ Individual ACK
➪ Position ACK
➪ Test ACK
Rotate Dial or push [ Y]/[Z] to select "Auto TX" or "Manual
w
TX," then push [ENT].
• Push [BACK] to cancel and return to the DSC Settings menu.
Push [EXIT] to return to the normal operating mode.
e
7
DSC OPERATION
(default)
(default)
(default)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
63