Receiving An Individual Call - Icom iM323 Instruction Manual

7
DSC OPERATION

Receiving an Individual Call

D
When an Individual Call is received:
The alarm sounds for 2 minutes.
➥
"RCVD INDIVIDUAL CALL" pops up. The backlight may
➥
blink for 2 minutes, depending on the received Category.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action.
w
54
[IGN]
➥ Push to ignore the Call and return to the normal operating
mode.
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information. (p. 58)
➥
[ACK]
Push to display the "INDIVIDUAL ACK" screen to reply
➥
to the Call. Select one of three options, depending on
your situation. See page 30 for details of the Individual
Acknowledgement procedure.
When "INDIVIDUAL ACK" is set to "Auto TX (Unable)," the
transceiver automatically replies to the Call. In that case,
both the TX and RX calls are stored in the Transmitted and
Received Call Logs.