Icom iM323 Instruction Manual page 65

Receiving a Group Call/Geographical Area
D
Call
[Example]: Receiving a Group call.
When a Group Call is received:
The alarm sounds for 2 minutes.
➥
"RCVD GROUP CALL" pops up. The backlight may blink
➥
for 2 minutes, depending on the received Category.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action.
w
[IGN]
Push to ignore the Call and return to the normal operat-
➥
ing mode.
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information. (p. 58)
➥
[ACPT]
Push to monitor the channel specified by the calling
➥
station (Example: 08) for an announcement from the
calling station.
Note for Geographical Area Call
When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all Geographical Area
Calls are received, regardless of your position.
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
55