Mounting The Transceiver - Icom iM323 Instruction Manual

Mounting the transceiver

■
Using the supplied mounting bracket
D
The universal mounting bracket supplied with your transceiv-
er allows overhead or dashboard mounting.
Mount the bracket securely to a surface which is more than
q
10 mm thick and can support more than 5 kg using the 2
supplied screws (5 × 20 mm).
Attach the transceiver to the bracket so that the face of the
w
transceiver is at 90° to your line of sight when operating it.
KEEP the transceiver and microphone at least 1 meter
away from the vessel's magnetic navigation compass.
NOTE: Check the installation angle; the function display
may not be easy-to-read at some angles.
NOTE for the IC-M323G/IC-M324G:
IC-M323G/IC-M324G's GPS is located at the right top of
the front panel.
If the transceiver is covered with any object that inteerupts
the GPS signals from the satelites, the GPS receiver will
not culculate its position.
Therefore, when you using the GPS feature, be sure the
transceiver is positioned so the antenna has a clear view
to receive signals from satellites.
CONNECTIONS AND MAINTENANCE
• OVERHEAD MOUNTING
• MOUNTING ON THE BOARD
9
These bolts are shown a
mounting example only.
Not supplied with accesso-
ries.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
83