Channel 70 Squelch Level - Icom iM323 Instruction Manual

Alarm
D
Set the Alarm function ON or OFF, depending on the Cat-
egory or Status.
Enter "ALARM" in the DSC Settings menu.
q
➪ DSC Settings
MENU
(Push [MENU]) (Rotate Dial, then push [ENT].)
Rotate Dial or push [ Y]/[Z] to select the status, then push
w
[ENT].
• Push [BACK] to cancel and return to the DSC Settings menu.
• "Safety," "Routine," "Warning," "Self-Terminate" and "Discrete" are
selectable. (default: ON )
Rotate Dial or push [ Y]/[Z] to set the Alarm setting to "ON"
e
or "OFF."
Push [EXIT] to return to the normal operating mode.
r
➪
Alarm

Channel 70 Squelch level

D
Set the squelch level on Channel 70.
The transceiver has 11 squelch levels between 1 (loose
squelch) and 10 (tight squelch) and OPEN.
OPEN is completely open.
Enter "CH 70 SQL LEVEL" in the DSC Settings menu.
q
➪ DSC Settings
MENU
(Push [MENU]) (Rotate Dial, then push [ENT].)
Rotate Dial or push [ Y]/[Z] to adjust the squelch level until
w
the noise just disappears, then push [ENT].
• Push [BACK] to cancel and return to the DSC Settings menu.
Push [EXIT] to return to the normal operating mode.
e
7
DSC OPERATION
➪ CH 70 SQL Level
(default)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
65