M.2 Solid-State Drive - Lenovo 30BA User Manual

6. Slide the storage drive bracket with the converter into the storage drive bay until it snaps into position.
Figure 95. Installing the type
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 145.

M.2 solid-state drive

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
An M.2 solid-state drive can be installed on the M.2 solid-sate drive holder or an M.2 solid-state drive PCIe
adapter.
M.2 solid-state drive in the M.2 solid-sate drive holder
To remove or install an M.2 solid-state drive, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 63.
2. Lay the computer on its side for easier access to the M.2 solid-state drive slots.
3. Locate the M.2 solid-state drive slots. See "Parts on the system board" on page 7.
106
P720 User Guide
2
storage drive bracket