Lenovo 30BA User Manual page 122

6. To remove the M.2 solid-state drive, do the following:
a. Loosen the screw that secures the M.2 solid-state drive
b. Remove the M.2 solid-state drive with the screw holder from the M.2 solid-state drive slot
c. Remove the screw holder from the M.2 solid-state drive
Figure 98. Removing the M.2 solid-state drive
7. To install an M.2 solid-state drive, do the following:
a. Stick a thermal pad into the position on the M.2 solid-state drive holder as shown. If necessary,
remove the film that protects the thermal pad.
Figure 99. Sticking a thermal pad on the M.2 solid-state drive holder
108
P720 User Guide
1 .
3 .
2 .