Lenovo 30BA User Manual page 115

e. Push the metal bracket down until the tab
storage drive forward as shown until the tab
Figure 84. Installing the metal bracket into the plastic frame of the converter
f. Flex both sides of the plastic bracket and align pins
holes in the plastic frame of the converter.
Note: Ensure that the circuit board faces upward and the connectors
bracket.
Figure 85. Installing the converter into the type
1 is slightly curved. Then, push the bracket with the
1
snaps into position.
1 on the plastic bracket with the corresponding
1
bracket
.
Chapter 7
2 face toward the front of the
Hardware removal and installation
101