a. Flex both sides of the bracket to remove the 2.5-inch storage drive from the bracket.
Figure 22. Removing the 2.5-inch storage drive from the bracket
b. Lift the tab
1
of the metal bracket and push the metal bracket with force as shown. Then slide the
bracket and remove it from the plastic frame.
Figure 23. Removing the metal bracket from the plastic frame of the converter
c. Carefully flex both sides of the metal bracket to remove the storage drive from the bracket.
Figure 24. Removing the storage drive from the metal bracket
5. To install a new 2.5-inch storage drive into the front-access storage enclosure, do the following:
.
Chapter 7
Hardware removal and installation
71