Table of Contents
Advertisement
7. To install a 3.5-inch storage drive into the conversion bracket, do the following:
a. Flex both sides of the bracket and align pins
holes in the new 3.5-inch storage drive.
b. Install the new 3.5-inch storage drive into the bracket. Do not touch the circuit board
Figure 41. Installing the new 3.5-inch storage drive into the bracket
8. Slide the new 3.5-inch storage drive with bracket into the kit from the rear until the drive snaps into
position.
Figure 42. Installing the new 3.5-inch storage drive with bracket into the kit
80
P720 User Guide
1
,
2
,
3
, and
4
on the bracket with the corresponding
5
on the drive.
- Quick Links:
- Computer Components
Hide quick links:
Advertisement
Table of Contents
