Table of Contents
Advertisement
b. Flex both sides of the bracket to remove the converter from the bracket.
Figure 79. Removing the converter from the type
1
c. Lift the tab
of the metal bracket and push the metal bracket with force as shown. Then slide the
bracket and remove it from the plastic frame.
Figure 80. Removing the metal bracket from the plastic frame of the converter
d. Carefully flex both sides of the metal bracket to remove the storage drive from the bracket.
Figure 81. Removing the storage drive from the metal bracket of the converter
4. To install a 2.5-inch storage drive with a converter in a type
a. Open the handles on both sides of the storage drive bracket and pull out the empty bracket.
b. If the converter is installed in the bracket, flex both sides of the bracket to remove the converter from
the bracket.
1
bracket
1
bracket, do the following:
.
Chapter 7
Hardware removal and installation
99
- Quick Links:
- Computer Components
Hide quick links:
Advertisement
Table of Contents
