1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. ThinkStation P520c
  6. User manual

Lenovo ThinkStation P520c User Manual

Hide thumbs Also See for ThinkStation P520c:
Table of Contents

Advertisement

Quick Links

Download this manual
Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
P520c 30BX00BHIX
P520c User Guide
Machine Types: 30BY, 30BX, and 30C0
o cerca il tuo prodotto tra le
migliori offerte di PC Desktop e Workstation
Lenovo ThinkStation

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ThinkStation P520c

Summary of Contents for Lenovo ThinkStation P520c

  • Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Lenovo ThinkStation P520c 30BX00BHIX o cerca il tuo prodotto tra le migliori offerte di PC Desktop e Workstation P520c User Guide Machine Types: 30BY, 30BX, and 30C0...
  • Page 2 Important safety information” on page iii and Appendix G “Notices” on page 131. Ninth Edition (June 2020) © Copyright Lenovo 2017, 2020. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA”...

  • Page 3: Table Of Contents

    Changing the display language of the Setup Utility program ... . . An introduction to Lenovo programs ..Enabling or disabling a device ..
  • Page 4 CD or DVD problems ... Lenovo Web site... . . 111 Intermittent problems ...

  • Page 5: Read This First: Important Safety Information

    Replacement parts approved for customer installation are referred to as Customer Replaceable Units, or CRUs. Lenovo provides documentation with instructions when it is appropriate for customers to install options or replace CRUs. You must closely follow all instructions when installing or replacing parts.

  • Page 6: Static Electricity Prevention

    When replacing CRUs, be cautious of sharp edges or corners that might cause injury. If you suffer an injury, seek medical care immediately. Static electricity prevention Static electricity, although harmless to you, can seriously damage computer components and options. Improper handling of static-sensitive parts can damage the part. When you unpack an option or CRU, do not open the static-protective package containing the part until the instructions direct you to install it.

  • Page 7: Extension Cords And Related Devices

    Your computer, power adapter, and many accessories produce some heat during normal operation. Extended contact with the body could cause discomfort or, potentially, a skin burn. © Copyright Lenovo 2017, 2020...

  • Page 8: Computer Placement Notices

    • Do not charge the battery or operate your computer, power adapter, or accessories near flammable materials or in explosive environments. • Ventilation slots, fans, and heat sinks are provided with the product for safety, comfort, and reliable operation. These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible surface.

  • Page 9: Laser Compliance Statement

    Disassembling of these components might cause fire or might even result in death. If you suspect a problem with one of these parts, contact a service technician. Lithium coin-cell battery notice DANGER Danger of explosion if battery is incorrectly replaced. © Copyright Lenovo 2017, 2020...

  • Page 10: Using Earphones, Headphones, Or A Headset

    2 can be dangerous due to excessive sound pressure levels. If your Lenovo computer came with headphones or earphones in the package, as a set, the combination of the headphones or earphones and the computer already complies with the specifications of EN 50332-1. If different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5...

  • Page 11: Cleaning And Maintenance

    Do not spray any liquid detergent directly on the computer or use any detergent containing flammable material to clean the computer. Spray the detergent on a soft cloth and then wipe the computer surfaces. © Copyright Lenovo 2017, 2020...
  • Page 12 P520c User Guide...

  • Page 13: Chapter 1. Product Overview

    Note: The computer hardware might look slightly different from the illustration. Figure 1. Front connectors, controls, and indicators Optical-drive eject/close button (available on some USB 3.0 connectors (2) models) Power button Storage drive activity indicator Power indicator Microphone connector Headphone connector SD card slot © Copyright Lenovo 2017, 2020...

  • Page 14: Rear View

    Optical-drive eject/close button Press the button to eject or close the tray of the optical drive. USB 3.0 connectors (2) Use this connector to attach a USB-compatible device, such as a USB keyboard, mouse, storage drive, or printer. Storage drive activity indicator This indicator shows the status of the internal storage drives (such as hard disk drives or solid-state drives).
  • Page 15 Figure 2. Rear view Security-lock slot Ethernet connector Padlock loop Serial connector (available on some models) Audio line-in connector PCIe card area* Audio line-out connector Microphone connector USB 2.0 connectors (2) USB 3.0 connectors (4) Serial connector (available on some models) PS/2 keyboard connector PS/2 mouse connector Power-cord connector...
  • Page 16 DisplayPort connector Use this connector to attach a high-performance monitor, a direct-drive monitor, or other compatible devices. DVI monitor connector Use this connector to attach a DVI monitor or other compatible devices. Mini DisplayPort connector Use this connector to attach a high-performance monitor, a direct-drive monitor, or other compatible devices.

  • Page 17: Computer Components

    USB 2.0 connector(2) Use this connector to attach a USB-compatible device, such as a USB keyboard, mouse, storage drive, or printer. USB 3.0 connector(4) Use this connector to attach a USB-compatible device, such as a USB keyboard, mouse, storage drive, or printer.

  • Page 18: Parts On The System Board

    Figure 3. Component locations Heat-sink-and-fan assembly Memory module Optical drive (available on some models) Card reader Front bezel Front audio and USB assembly M.2 solid-state drive assembly (available on some Front fan assembly models) Storage drives Graphics card (available on some models) Cover presence switch (also called intrusion switch) Rear fan assembly (available on some models)
  • Page 19 Figure 4. System board part locations 4-pin power connector Memory slot Memory slot Microprocessor fan connector Microprocessor Memory slot Memory slot Flex bay 1 fan connector Flex bay 2 fan connector Thermal sensor connector 14-pin power connector 4-pin SATA power connector 4-pin SATA power connector M.2 solid-state drive slot 1 M.2 solid-state drive slot 2...

  • Page 20: Internal Storage Drives

    PCIe x4 card slot PCIe x16 card slot PCIe x8 card slot PCIe x16 card slot (graphics card available on some models) Cover presence switch connector (intrusion switch Rear-fan connector connector) SATA Serial (COM) connector Internal storage drives Internal storage drives are devices that your computer uses to read and store data. You can add drives to your computer to increase storage capacity and enable your computer to read other types of media.

  • Page 21: Machine Type And Model Label

    One or two M.2 solid state drives are installed in some models. Machine type and model label The machine type and model label identifies your computer. When you contact Lenovo for help, the machine type and model information helps support technicians to identify your computer and provide faster service.

  • Page 22: Computer Features

    Figure 6. Machine type and model label Computer features For your specific computer model, some features might vary or not apply. Information about your computer • To view basic information (such as microprocessor and memory information) about your computer, do the following: 1.
  • Page 23 Storage drives Your computer supports the following storage drives: • Hard disk drive • Hybrid drive (available on some models) • M.2 solid-state drive (available on some models) • Optical drive (available on some models) • SD card (available on some models) •...
  • Page 24 • Memory slots • PCIe x4 card slot • PCIe x8 card slot • PCIe x16 card slots • SD card slot • Storage drive bays Power supply 500-watt automatic 92% voltage-sensing power supply Wireless features Depending on your computer model, the following wireless features are supported: •...

  • Page 25: Computer Specifications

    Your computer is preinstalled with the Windows 10 operating system. Additional operating systems might be identified by Lenovo as compatible with your computer. To determine if an operating system has been certified or tested for compatibility, check the Web site of the operating system provider.

  • Page 26: Programs

    An introduction to Lenovo programs This section provides information about the major Lenovo programs available on your operating system. Note: Depending on your computer model, some of the following programs might not be available. P520c User Guide...
  • Page 27 – The available features vary depending on the computer model. – Lenovo Vantage makes periodic updates of the features to keep improving your experience with your computer. The description of features might be different from that on your actual user interface.
  • Page 28 P520c User Guide...

  • Page 29: Chapter 2. Using Your Computer

    When you register your computer with Lenovo, you enter required information into a Lenovo database. The information enables Lenovo to contact you when there is a recall or other severe problem and provide quicker service when you call Lenovo for help. In addition, some locations offer extended privileges and services to registered users.

  • Page 30: Playing And Removing A Disc

    • To remove dust or fingerprints, wipe the disc with a clean, soft cloth from the center to the outside. Wiping the disc in a circular direction might cause loss of data. • Do not write or stick paper on the disc. •...

  • Page 31: Connecting To A Network

    1. Insert a recordable disc into the optical drive that supports recording. 2. Double-click the ISO file. 3. Follow the instructions on the screen. Recording a disc using preinstalled programs To record a disc using preinstalled programs, do the following: 1.
  • Page 32 2. Click the Bluetooth icon in the Windows notification area on the taskbar. Then, click Add a Device and follow the instructions on the screen. Note: If the Bluetooth icon is not displayed in the Windows notification area, add the icon to the notification area.

  • Page 33: Chapter 3. You And Your Computer

    For more information about power cords or power adapters, see “Power cords and power adapters” on page Comfort Although no single working position is ideal for everyone, here are a few guidelines to help you find a position that suits you best. The following figure sets an example for your reference. © Copyright Lenovo 2017, 2020...

  • Page 34: Accessibility Information

    Accessibility information Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater access to information and technology. This section provides information about the ways these users can get the most out of their computer experience. You also can get the most up-to-date accessibility information from the following Web site: https://www.lenovo.com/accessibility...
  • Page 35 To use Ease of Access Center, do the following: 1. Click the Start button to open the Start menu. 2. Click Settings ➙ Ease of Access. 3. Choose the appropriate tool by following the instructions on the screen. Ease of Access Center mainly includes the following tools: •...
  • Page 36 Then, you can type a message on your computer and send it to the telephone. Documentation in accessible formats Lenovo provides electronic documentation in accessible formats, such as properly tagged PDF files or HyperText Markup Language (HTML) files. Lenovo electronic documentation is developed to ensure that visually impaired users can read the documentation through a screen reader.

  • Page 37: Cleaning Your Computer

    Cleaning your computer Attention: Do not open your computer or attempt any repair before reading and understanding the “Read this first: Important safety information” on page iii. Properly remove or install your computer cover. See Chapter 7 “Hardware removal and installation” on page 55. CAUTION: Remove any media from the drives and turn off all connected devices and the computer.

  • Page 38: Keeping Your Computer Current

    The cause of a problem might be change in hardware, change in software, or any other actions that might have taken place. A log book can help you or a Lenovo technician determines the cause of a problem. • Create Product Recovery discs. See “Recovery information” on page 54 for more information about using Product Recovery discs to restore the hard disk drive to the factory-default settings.

  • Page 39: Chapter 4. Security

    The cable lock also locks the buttons used to open the computer cover. This is the same type of lock used with many notebook computers. You can order such a cable lock directly from Lenovo by searching for Kensington at: http://www.lenovo.com/support Note: The computer hardware might look slightly different from the illustration.

  • Page 40: Viewing And Changing Security Settings In The Setup Utility Program

    Figure 8. Kensington-style cable lock Viewing and changing security settings in the Setup Utility program To view and change security settings in the Setup Utility program, do the following: 1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 31. 2.

  • Page 41: Using The Cover Presence Switch

    Click the Start button to open the Start menu, and then click Settings ➙ Accounts ➙ Sign-in options. Follow the instructions on the screen. To use the fingerprint reader, refer to the documentation shipped with the fingerprint keyboard or located on the Lenovo Support Web site at https://pcsupport.lenovo.com/solutions/pd014444 Using the cover presence switch The cover presence switch prevents your computer from logging in to the operating system when the computer cover is not properly installed or closed.

  • Page 42: Using The Smart Usb Protection Function

    Lenovo provides a full version of antivirus software on your computer with a free 30-day subscription. After 30 days, you must renew the license to continue receiving the antivirus software updates. Note: Virus definition files must be kept up-to-date to guard against new viruses.

  • Page 43: Chapter 5. Advanced Configuration

    Changing the display language of the Setup Utility program The Setup Utility program supports three display languages: English, French, and simplified Chinese. To change the display language of the Setup Utility program, do the following: © Copyright Lenovo 2017, 2020...

  • Page 44: Enabling Or Disabling A Device

    Then, select Yes in the window displayed, and press Enter. Enabling or disabling the ErP LPS compliance mode Lenovo computers meet the eco-design requirements of the ErP Lot 3 regulation. For more information, go https://www.lenovo.com/ecodeclaration You can enable the ErP LPS compliance mode in the Setup Utility program to reduce the consumption of electricity when your computer is off or in sleep mode.

  • Page 45: Enabling Or Disabling The Configuration Change Detection

    • Press the power button. • Enable the Wake Up on Alarm feature to make your computer wake up at a set time. See “Enabling or disabling the automatic power-on of your computer” on page 32. • Enable the After Power Loss feature to make your computer wake up when the power supply resumes after a sudden loss of electricity.
  • Page 46 You do not have to set any passwords to use your computer. However, using passwords improves computer security. If you decide to set any passwords, read the following topics. Password types The following types of passwords are available in the Setup Utility program: •...

  • Page 47: Selecting A Startup Device

    4. Follow the instructions on the right side of the screen to set, change, or delete a password. Note: A password can be any combination of up to 64 alphabetic and numeric characters. For more information, see “Password considerations” on page 34. 5.

  • Page 48: Changing The Fan Speed Level

    5. To save settings and exit the Setup Utility program, press F10 or Fn+F10 (depending on the keyboard settings). Then, select Yes in the window displayed, and press Enter. Selecting a temporary startup device Note: Not all discs and storage drives are bootable. To select a temporary startup device, do the following: 1.

  • Page 49: Configuring Raid

    To update the BIOS, do the following: 1. Go to https://support.lenovo.com 2. To update the BIOS from your operating system, download the flash BIOS update driver according to your operating system version. To update the BIOS from a flash update disc, download the ISO image version (used to create a flash update disc).

  • Page 50: An Introduction To Raid

    • Intel Virtual RAID on CPU configuration utility An Introduction to RAID RAID is a technology that provides increased storage functions and reliability through redundancy. When a group of independent physical storage drives is set up to use RAID technology, they are in a RAID array.

  • Page 51: Configuring Raid With Avago Megaraid Configuration Utility

    d. To save settings and exit the Setup Utility program, press F10 or Fn+F10 (depending on the keyboard settings), select Yes in the window displayed, and press Enter. 2. Start the Setup Utility program again. See “Starting the Setup Utility program” on page 31. 3.
  • Page 52 • An AVAGO MegaRAID adapter is installed in your computer. • The storage drives used for RAID configuration are connected to the installed AVAGO MegaRAID adapter instead of the system board. Storage drive requirements for RAID levels Your computer supports the following RAID levels: •...

  • Page 53: Configuring Raid With Intel Virtual Raid On Cpu

    • RAID5 • RAID6 • RAID10 Note: Some of the RAID levels might not be displayed because the number of installed SATA storage drives and the model of the AVAGO MegaRAID adapter vary. b. Select Drives From: Select Unconfigured capacity or Free capacity depending on your needs and press Enter.
  • Page 54 • An upgrade key module is connected to the Virtual RAID on CPU (VROC) connector on the system board. See “Hardware locations” on page 1. • M.2 solid-state drives are installed in your computer. Storage drive requirements for RAID levels Your computer supports the following RAID levels: •...
  • Page 55 • RAID1 • RAID10 • RAID5 Note: Some of the RAID levels might not be displayed because the number of installed M.2 solid- state drives and the model of the upgrade key module vary. c. Select Disks: Select an M.2 solid-state drive and press Enter. Then, select X and press Enter to add it to a group.
  • Page 56 P520c User Guide...

  • Page 57: Chapter 6. Troubleshooting, Diagnostics, And Recovery

    5. Recover your operating system. See “Recovery information” on page 54. 6. If none of these actions solve your problem, contact the Lenovo Customer Support Center. For a list of Lenovo Support phone numbers, go to http://www.lenovo.com/support/phone...

  • Page 58: Audio Problems

    • The computer voltage matches the voltage available at the electrical outlet for your country or region. The operating system fails to start up. Solution: Ensure that the startup device sequence set in the Setup Utility program includes the device where the operating system resides.

  • Page 59: Cd Or Dvd Problems

    CD or DVD problems A CD or DVD does not work. Solutions: • Ensure that the power cable and signal cable are securely connected to the drive. • Ensure that the disc is inserted correctly, with its label up. • Ensure that the disc you are using is clean. To remove dust or fingerprints, wipe the disc clean with a soft cloth from the center to the outside.

  • Page 60: Intermittent Problems

    • Ensure that video resolution is lower than 1152 x 864 pixels. A message indicating invalid disc or no disc found is displayed. Solutions: • Ensure that the disc is in the drive with the shiny side of the disc facing down. •...

  • Page 61: Wireless Lan Problem

    1. Click the Start button to open the Start menu. 2. Click Windows System ➙ Control Panel. 3. View Control Panel by Large icons or Small icons, and then click Network and Sharing Center ➙ Change adapter settings. 4. Right-click the Ethernet LAN adapter icon and click Enable. •...

  • Page 62: Bluetooth Problems

    Bluetooth problems Note: The Bluetooth feature is available only on some models. The Bluetooth feature does not work. Solutions: • Enable the Bluetooth feature in the Setup Utility program. • Enable the Bluetooth devices. Do the following: 1. Right-click the Start button to open the Start context menu. 2.

  • Page 63: Serial Connector Problem

    • Right-click a blank area on the taskbar and open Task Manager. Then, end some tasks you are not performing. • Install additional memory modules. See Chapter 7 “Hardware removal and installation” on page 55. To purchase memory modules, go to: https://www.lenovo.com Serial connector problem The serial connector cannot be accessed. Solutions: •...

  • Page 64: Usb Device Problems

    • Update the program. See “Keeping your computer current” on page 26. • Uninstall the program and then reinstall it. To download a program that is preinstalled on your computer, go to https://support.lenovo.com and follow the instructions on the screen. A device does not work properly due to device driver problems.
  • Page 65 Note: If you are unable to isolate and repair the problem yourself after running Lenovo Vantage, save and print the log files created by the program. You need the log files when you speak to a Lenovo technical support representative.

  • Page 66: Recovery Information

    “Selecting a temporary startup device” on page 36. Then, follow the instructions on the screen to choose the appropriate recovery solution. • Use the recovery USB key provided by Lenovo to restore the entire storage drive to the factory-default settings.

  • Page 67: Chapter 7. Hardware Removal And Installation

    3. Remove the two screws that secure the computer cover. 4. Press the cover-release button on the side of the computer and slide the cover to the rear of the computer to remove the cover. © Copyright Lenovo 2017, 2020...

  • Page 68: Removing And Installing Hardware

    • When removing or installing an option, use the appropriate instructions in this section along with the instructions that come with the option. • In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will come with the CRU or will come a few days after the CRU arrives.

  • Page 69: Front Bezel

    Front bezel Attention: Do not open your computer or attempt any repair before reading and understanding the “Read this first: Important safety information” on page iii. To remove and install the front bezel, do the following: 1. Prepare your computer. See “Preparing your computer and removing the computer cover” on page 55. 2.

  • Page 70: Pcie Card

    5. Remove the screw that secures the power button to the front bezel. Then, remove the power button from the front bezel. Figure 11. Removing the power button 6. Align the screw hole in the power button with the corresponding hole in the front bezel. Then install the screw to secure the power button to the front bezel.
  • Page 71 Your computer has one PCIe x4 card slot, one PCIe x8 card slot, and two PCIe x16 card slots (graphics card available on some models). Half-length PCIe card To remove or install a half-length PCIe card, do the following: 1. Prepare your computer. See “Preparing your computer and removing the computer cover” on page 55. 2.
  • Page 72 5. To remove a half-length PCIe card, grasp the old card that is currently installed and gently pull it out of the slot. Figure 15. Removing a PCIe card Notes: • If the card is connected to other device, disconnect the cables from the card. •...
  • Page 73 d. Pivot the card latch to the closed position to secure the PCIe card. Figure 17. Closing the PCIe card latch What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 108. Full-length PCIe card To remove or install a full-length PCIe card, do the following: 1.
  • Page 74 5. If the PCIe card slot is a PCIe x16 card slot, press the retaining latch as shown to disengage the latch. Figure 19. Disengaging the retaining latch 6. To remove a full-length PCIe card, do the following: a. Pivot the tab on the front fan assembly outward to open the latch inside. Figure 20.
  • Page 75 b. Grasp the old card that is currently installed and gently pull it out of the slot. Notes: • If the card is connected to other device, disconnect the cables from the card. • The card might fit tightly into the slot. If necessary, alternately move each side of the card a small amount until the card is removed from the slot.
  • Page 76 b. Align the notch on the new full-length PCIe card with the slot key in a PCIe x16 card slot on the system board. Then, insert the new card downward into the card slot until it is secured tightly. See “Parts on the system board”...

  • Page 77: Memory Module

    8. Pivot the card latch to the closed position to secure the full-length PCIe card. Figure 24. Closing the PCIe card latch What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 108. Memory module Attention: Do not open your computer or attempt any repair before reading and understanding the “Read this first: Important safety information”...
  • Page 78 • Install memory modules in the alphabetic order as shown. Figure 25. Memory module installation order To remove or install a memory module, do the following: 1. Prepare your computer. See “Preparing your computer and removing the computer cover” on page 55. 2.

  • Page 79: Optical Drive

    6. To install a memory module, do the following: a. Open the retaining clips of the memory slot into which you want to install the memory module. Figure 27. Opening the retaining clips b. Position the new memory module over the memory slot. Ensure that the notch on the memory module is aligned with the key in the slot.
  • Page 80 • Optical drive • Slim-optical-drive adapter • Storage drive bracket Note: The following instructions on how to remove or install an optical drive also apply to other supported devices in the flex bay. To remove or install an optical drive, do the following: 1.
  • Page 81 a. Locate the optical-drive retainer from the left side of the computer. Push the retainer downwards to unlock the retainer. Then lift the retainer out of the chassis. Figure 30. Removing the optical-drive retainer from the computer b. Install the optical-drive retainer onto the left side of the new optical drive. Figure 31.

  • Page 82: Storage Drive In The Front-Access Storage Enclosure

    d. Slide the new optical drive into the flex bay from the front of the computer until the optical drive snaps into position. Figure 32. Installing the optical drive e. Connect the cables to the rear of the new optical drive. Figure 33.
  • Page 83 • The SATA cable of the front-access storage enclosure is connected to the eSATA connector on the system board. To verify the cable connection, see “Preparing your computer and removing the computer cover” on page 55 and “Parts on the system board” on page 6 for more information. •...
  • Page 84 4. To remove the 3.5-inch storage drive, flex both sides of the bracket to remove the 3.5-inch storage drive from the bracket. Figure 36. Removing the 3.5-inch storage drive from the bracket 5. To install a new 3.5-inch storage drive into the front-access storage enclosure, do the following: P520c User Guide...
  • Page 85 a. Flex both sides of the bracket and align pins on the bracket with the corresponding holes in the new 3.5-inch storage drive. Notes: • Ensure that the circuit board faces downward and the connectors face toward the rear of the bracket.
  • Page 86 • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 108. 2.5-inch storage drive To remove or install a 2.5-inch storage drive, do the following: 1.
  • Page 87 b. Pivot the tab of the metal adapter upward. Then, push the adapter as shown until the four tabs on the adapter slide into the notches . Pivot the adapter as shown to remove it with the storage drive from the converter. Figure 42.
  • Page 88 a. Note the orientation of the connector on the new storage drive. Then, flex both sides of the adapter and align the four pins with the corresponding holes in the storage drive. Note: Do not touch the circuit board (if accessible) of the 2.5-inch storage drive. Figure 44.

  • Page 89: M.2 Solid-State Drive

    c. Flex both sides of the plastic bracket and align pins on the plastic bracket with the corresponding holes in the plastic frame of the converter. Notes: • Ensure that the circuit board faces downward and the connectors face toward the rear of the bracket.
  • Page 90 M.2 solid-state drive in the storage drive bracket To remove or install the M.2 solid-state drive in the storage drive bracket, do the following: 1. Prepare your computer. See “Preparing your computer and removing the computer cover” on page 55. 2.
  • Page 91 b. Remove two screws and slide the cover as shown to remove the cover from the carrier. Figure 49. Removing the cover of the M.2 solid-state drive carrier c. Loosen the screw that secures the M.2 solid-state drive. Then, remove the M.2 solid-state drive out of the slot at an angle of about 20 degrees.
  • Page 92 a. Insert the new M.2 solid-state drive into the slot at an angle of about 20 degrees. Pivot the M.2 solid- state drive downward. Then, tighten the screw to secure the M.2 solid-state drive. Figure 51. Installing the M.2 solid-state drive b.

  • Page 93: Device In The Multi-Drive Conversion Kit

    c. Reinstall the carrier into the bracket as shown until it snaps in to position. Lock the carrier with the key. Always store the key in a secure place. Figure 53. Reinstalling the M.2 solid-state drive carrier What to do next: •...
  • Page 94 2. Ensure that all the cables are disconnected from the kit. Remove the kit from the front of the computer. See “Optical drive” on page 67. 3. To remove the slim optical drive from the kit, do the following: a. Press the clip through the hole in the top of the kit as shown and push forward the slim optical drive. Then, remove the slim optical drive out of the kit.
  • Page 95 a. Align the three tabs on the bracket with the corresponding holes in the new slim optical drive. Then, install the bracket to the new slim optical drive. Figure 56. Installing the bracket to the new slim optical drive b. Insert the new slim optical drive into the kit until you hear a click. The slim optical drive is secured in place.
  • Page 96 3. Press the clip as shown to open the rear cover of the kit. Figure 58. Opening the rear cover of the kit 4. Press both clips simultaneously toward each other and pull the conversion bracket out of the rear of the kit.
  • Page 97 5. To remove the 3.5-inch storage drive, flex both sides of the conversion bracket and then remove the drive out of the bracket. Do not touch the circuit board on the drive. Figure 60. Removing the storage drive from the bracket 6.
  • Page 98 b. Release tabs , and from the corresponding slots. Figure 62. Releasing tabs from the corresponding slots c. Unfold the bracket as shown. Figure 63. Unfolding the bracket P520c User Guide...
  • Page 99 d. Insert tabs , and into the corresponding slots. Ensure that the tabs are secured in place. Figure 64. Inserting tabs into the corresponding slots 7. Install a 3.5-inch storage drive into the bracket by doing the following: a. Flex both sides of the bracket and align pins , and on the bracket with the corresponding holes in the new 3.5-inch storage drive.
  • Page 100 c. Slide the new 3.5-inch storage drive with bracket into the kit from the rear until the drive snaps into position. Figure 66. Installing the new 3.5-inch storage drive with bracket into the kit 8. Pivot the rear cover of the kit inward until you hear a click. Ensure that the rear cover is secured in place. Figure 67.
  • Page 101 3. Press the clip as shown to open the rear cover of the kit. Figure 68. Opening the rear cover of the kit 4. Press both clips simultaneously toward each other and pull the conversion bracket out of the rear of the kit.
  • Page 102 6. To install a 2.5-inch storage drive, ensure that the conversion bracket is folded. To fold the bracket, do the following: a. Remove pins and install them into slots Figure 71. Removing pins and installing them into new slots b. Pivot the bracket as shown to release tabs , and from the slots.
  • Page 103 d. Insert tabs , and into the corresponding slots. Ensure that the tabs are secured in place. Figure 74. Inserting the tabs into the corresponding slots 7. To install a 2.5-inch storage drive, do the following: a. Flex the bracket and align pins , and on the bracket with the corresponding holes in the new 2.5-inch storage drive.

  • Page 104: Coin-Cell Battery

    c. Slide the new 2.5-inch storage drive with bracket into the kit from the rear until the drive snaps into position. Figure 76. Installing the new 2.5-inch storage drive with bracket into the kit 8. Pivot the rear cover of the kit inward until you hear a click. Ensure that the rear cover is secured in place. Figure 77.

  • Page 105: Cover Presence Switch

    The coin-cell battery normally requires no charging or maintenance throughout its life; however, no battery lasts forever. If the coin-cell battery fails, the date and time information is lost. Refer to the “Lithium coin-cell battery notice” in the Safety, Warranty, and Setup Guide for information about disposing of the coin-cell battery.

  • Page 106: Power Supply Assembly

    a. Disconnect the cover presence switch cable from the cover presence switch connector on the system board. See “Parts on the system board” on page 6. b. Remove the screw that secures the cover presence switch and remove the cover presence switch from the chassis.
  • Page 107 Install and tighten the four screws to secure the power supply assembly. Note: Use only screws provided by Lenovo. d. Connect the power supply assembly cables to the system board and each of the drives.

  • Page 108: Heat-Sink-And-Fan Assembly

    What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 108. Heat-sink-and-fan assembly Attention: Do not open your computer or attempt any repair before reading and understanding the “Read this first: Important safety information”...
  • Page 109 b. Follow the following sequence to remove the four screws that secure the heat-sink-and-fan assembly to the system board: • Partially remove screw , then fully remove screw , and then fully remove screw • Partially remove screw , then fully remove screw , and then fully remove screw Note: Carefully remove the four screws to avoid any possible damage to the system board.

  • Page 110: Primary Storage Drive

    d. Connect the heat-sink-and-fan assembly cable to the microprocessor fan connector on the system board. See “Parts on the system board” on page 6. What to do next: • To work with another piece of hardware, go to the appropriate section. •...
  • Page 111 b. To install a new storage drive into the bracket, flex the bracket and align pin , pin , pin , and pin on the bracket with the corresponding holes in the storage drive. Do not touch the circuit board on the bottom of the storage drive.

  • Page 112: Secondary Storage Drive

    Secondary storage drive Attention: Do not open your computer or attempt any repair before reading and understanding the “Read this first: Important safety information” on page iii. Note: Your computer comes with a secondary storage drive bay for installing or replacing a secondary 3.5- inch storage drive or a 2.5-inch storage drive.
  • Page 113 b. To install a new storage drive into the bracket, flex the bracket and align pin , pin , pin , and pin on the bracket with the corresponding holes in the storage drive. Do not touch the circuit board on the bottom of the storage drive.

  • Page 114: 2.5-Inch Storage Drive

    2.5-inch storage drive Attention: Do not open your computer or attempt any repair before reading and understanding the “Read this first: Important safety information” on page iii. The 2.5-inch storage drive is only available on some models. To remove or install a 2.5-inch storage drive, do the following: 1.
  • Page 115 d. Remove the four screws that secure the 2.5-inch storage drive. Then lift the storage drive out of the storage-drive converter. Figure 91. Removing the 2.5-inch storage drive from the storage-drive converter 4. To install a 2.5-inch storage drive, do the following: a.
  • Page 116 c. Install a new 2.5-inch storage drive into the storage-drive converter. Then install the four screws to secure the new storage drive to the storage-drive converter. Figure 92. Installing a new 2.5-inch storage drive into the storage-drive converter P520c User Guide...

  • Page 117: Front Fan Assembly

    d. To install the storage-drive converter into the 3.5-inch storage-drive bracket, flex the bracket and align pin , pin , pin , and pin on the bracket with the corresponding holes in the converter. Figure 93. Installing the storage-drive converter together with the 2.5-inch storage drive into the storage-drive bracket e.

  • Page 118: Rear Fan Assembly

    a. Disconnect the front-fan assembly cable from the power fan connector on the system board. See “Parts on the system board” on page 6. b. The front fan assembly is attached to the chassis by four rubber mounts. Break or cut the rubber mounts and gently pull the front fan assembly out of the chassis.
  • Page 119 1. Prepare your computer. See “Preparing your computer and removing the computer cover” on page 55. 2. Locate the rear fan assembly. See “Computer components” on page 5. 3. To remove the rear fan assembly, do the following: a. Disconnect the rear-fan assembly cable from the system fan connector on the system board. See “Parts on the system board”...

  • Page 120: Completing The Parts Replacement

    What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 108. Completing the parts replacement CAUTION: After replacing a CRU, reinstall all protective covers, including the computer cover, before connecting power and operating the computer.
  • Page 121 4. Install the screws to secure the computer cover. 5. Place the computer in an upright position. 6. If there is any locking device available, lock the computer cover. See “Preparing your computer and removing the computer cover” on page 55. 7.
  • Page 122 P520c User Guide...

  • Page 123: Chapter 8. Getting Information, Help, And Service

    • Access troubleshooting and support information for your computer model and other supported products. • Find a Service Provider located near you. Lenovo Support Web site Technical support information is available on the Lenovo Support Web site at: https://support.lenovo.com © Copyright Lenovo 2017, 2020...

  • Page 124: Frequently Asked Questions

    • Engineering Change management - There might be changes that are required after a product has been sold. Lenovo or your reseller will make selected Engineering Changes (ECs) that apply to your hardware available.

  • Page 125: Using Other Services

    For technical assistance with the installation of or questions related to Service Packs for your preinstalled Microsoft Windows product, go to https://support.microsoft.com . You also can contact the Lenovo Customer Support Center for help. Some fees might apply. Purchasing additional services During and after the warranty period, you can purchase additional services.
  • Page 126 P520c User Guide...

  • Page 127: Appendix A. System Memory Speed

    2400 MT/s memory modules. Then the system memory speed will be no faster than 2400 MT/s. • The microprocessor models supported in your computer might vary. For a list of supported microprocessor models, contact the Lenovo Customer Support Center. © Copyright Lenovo 2017, 2020...
  • Page 128 P520c User Guide...

  • Page 129: Appendix B. Supplemental Information About The Ubuntu Operating System

    The LLW also is preinstalled on the computer. To access the LLW, go to the following directory: /usr/share/doc/lenovo-doc If you cannot view the LLW either from the Web site or from your computer, contact your local Lenovo office or reseller to obtain a printed version of the LLW.
  • Page 130 P520c User Guide...

  • Page 131: Appendix C. Regulatory And Tco Certified Information Of Countries And Regions

    • Consult an authorized dealer or service representative for help. Lenovo is not responsible for any radio or television interference caused by using other than specified or recommended cables and connectors or by unauthorized changes or modifications to this equipment.
  • Page 132 EU wireless module declarations are available at following Internet addresses: http://www.lenovo.com/eu- doc-workstations Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the installation of option cards from other manufacturers.
  • Page 133 Geräten), bzw. der EMV EU Richtlinie 2014/30/EU, für Geräte der Klasse B. Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland) GmbH, Meitnerstr. 9, D-70563 Stuttgart.
  • Page 134 All regulatory notices are available on the Lenovo Support Web site in electronic format. To access electronic copies of the documentation, go to https:// support.lenovo.com...

  • Page 135: Appendix D. Weee And Recycling Information Of Countries And Regions

    Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
  • Page 136 If you need to replace it with a new one, contact your place of purchase or contact Lenovo for service. If you need to dispose of a disused lithium battery, insulate it with vinyl tape, contact your place of purchase or an industrial-waste-disposal operator, and follow their instructions.
  • Page 137 If the battery needs to be replaced, contact your place of purchase or contact Lenovo for service. If you need to dispose of a lithium battery, insulate it with vinyl tape, contact your place of purchase or a waste-disposal operator, and follow their instructions.
  • Page 138 P520c User Guide...

  • Page 139: Appendix E. Restriction Of Hazardous Substances (Rohs) Directive Of Countries And Regions

    For more information about Lenovo worldwide compliance on RoHS, go to: https://www.lenovo.com/rohs-communication Turkish RoHS The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Waste Electrical and Electronic Equipment (WEEE). Ukraine RoHS India RoHS RoHS compliant as per E-Waste (Management) Rules.
  • Page 140 Mainland China RoHS Taiwan RoHS P520c User Guide...

  • Page 141: Appendix F. Energy Star Model Information

    ENERGY STAR, go to https://www.energystar.gov/ Lenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. To help in this endeavor, set the following power-management features to take effect when your computer has been inactive for a specified duration: Table 1.
  • Page 142 P520c User Guide...

  • Page 143: Appendix G. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
  • Page 144 P520c User Guide...

  • Page 145: Appendix H. Trademarks

    Linux is a registered trademark of Linus Torvalds. DisplayPort and Mini DisplayPort are trademarks of the Video Electronics Standards Association. Ubuntu is a registered trademark of Canonical Ltd. All other trademarks are the property of their respective owners. © 2020 Lenovo. © Copyright Lenovo 2017, 2020...
  • Page 146 P520c User Guide...

This manual is also suitable for:

30by30bx30c030bx00bhix

Table of Contents