Lenovo 30BA User Manual page 83

4. To remove the 3.5-inch storage drive, flex both sides of the bracket to remove the 3.5-inch storage drive
from the bracket.
Figure 17. Removing the 3.5-inch storage drive from the bracket
5. To install a new 3.5-inch storage drive, flex both sides of the bracket and align pins
with the corresponding holes in the new drive.
Notes:
• Ensure that the circuit board faces downward and the connectors face toward the rear of the bracket.
• Do not touch the circuit board on the storage drive during operation.
Figure 18. Installing the 3.5-inch storage drive into the bracket
1 on the bracket
.
Chapter 7 Hardware removal and installation
69