Removing The Measurement Case Assembly And Lowering The Partition Panel; Figure 7-5. Removing The Measurement Case Assembly And Lowering The Partition Panel - Thermo Scientific 5030i SHARP Instruction Manual

Servicing

Removing the Measurement Case Assembly and Lowering the Partition Panel

Removing the
Measurement Case
Assembly and Lowering
the Partition Panel
REMOVE SCREWS
Pass Through
Connectors
Loosen
Captive
Partition Panel
Screw
Remove Screw
7-12 Model 5030i SHARP Instruction Manual
5. Pull the cover in an upward direction.
6. Replace the SHARP optics assembly by following the previous steps in
reverse.
The measurement case assembly can be removed and the partition panel
can be lowered to improve access to connectors and components. Refer to
the following steps when a procedure requires lowering the partition panel
(Figure 7–5).
Remove SHARP Optics
Cover Assembly
Remove Screws
LOWER PANEL
Figure 7–5. Removing the Measurement Case Assembly and Lowering the
Partition Panel
Equipment Required:
Philips screwdriver
SLIDE CASE ASSEMBLY OUT
Remove Hidden Screw
Thermo Fisher Scientific