Standard Equipment; Options; Storage; Preparation For Use - Otto Bock Voyager Evo Instructions For Use Manual

Preparation for Use

• Options according to the order
• Instructions for Use (User)

4.2 Standard equipment

The standard equipment includes:
• High-strength aluminium frame (open frame) with caster attachment device
• Rigid axle, aluminium
• Rear wheels with quick-release axle
• Wheel locks
• Fixed back plate, aluminium
• Fixed seat plate, aluminium
• "Standard" side panels, aluminium
• "Fixed" footrest, aluminium
• Caster wheels in caster forks with threaded axle
The seat cushion is not included in the standard package.

4.3 Options

The standard model can be fitted to the user's personal requirements thanks to a large range of options. For use of
these options: see Page 13.

4.4 Storage

The wheelchair must be stored dry. The ambient temperature must be maintained between -10°C and +40°C.
Wheelchairs with PU tyres should not be stored for prolonged periods with the knee-lever brake applied as the
tyres could be deformed.
INFORMATION
Tyres contain chemical substances that can react with other chemical substances (such as cleaning agents,
acids, etc.).
5 Preparation for Use

5.1 Assembly

CAUTION
Exposed pinch points
Risk of crushing or pinching the fingers due to incorrect handling
► When folding out the backrest, only grip by the specified components.
CAUTION
Failure to check that the wheelchair is ready for use
Risk of falling, tipping of the user
► Before using the wheelchair for the first time, check the pre-settings with the support of the qualified person­
nel.
► After every assembly, check the proper mounting of the rear wheels. The wheel axles must be securely locked
in the fitting.
► Pay attention in particular to the stability against tipping, free running of the rear wheel and correct function of
the brakes.
► Check the tyre inflation pressure. The correct air pressure is printed on the sidewall of the tyre. For rear
wheels, the minimum air pressure is 7 bar. Ensure that both tyres are inflated to the same pressure.
INFORMATION
For details of weights of the individual parts, see the section "Technical Data".
For disassembly/transportation, see the section "Disassembly/Transport".
A few simple steps are sufficient for preparing the wheelchair for use:
1) Attach the rear wheels to the quick-release axle housings (see Fig. 2):
→ Press in the button on the quick-release axle.
12 | Ottobock Voyager Evo