Using The Tip-Assist; Additional Options; Disassembly / Transport - Otto Bock Voyager Evo Instructions For Use Manual

→ The anti-tipper is activated.
Deactivation
1) From above, press on the anti-tipper with the hand or foot until it disengages (see Fig. 31, item 1; see Fig. 32,
item 1).
2) Rotate the anti-tipper forward by 180° and release it (see Fig. 31, item 1; see Fig. 32, item 1).
→ The anti-tipper is deactivated.
29
31

6.3.7.2 Using the tip-assist

1) At an obstacle, place one foot on the tip-assist and push down (not illustrated).
2) Slightly tip the wheelchair by simultaneously pressing down on the push handles.

6.3.8 Additional options

The product may be equipped with additional options.
The options are firmly mounted to the product by qualified personnel or the manufacturer and are pre-adjusted by
qualified personnel at delivery.

6.4 Disassembly / Transport

NOTICE
Impermissible loading of the folded-in backrest
Deformations, problems when unfolding
► Never rest heavy objects on the backrest when it is folded in.
The wheelchair must be prepared for transport in a passenger vehicle.
The small folded size (with the backrest folded) allows the product to be stored in a small car boot or on the pas­
senger seat.
1) Remove the side panels (see Page 18).
2) If necessary: Detach the seat cushion from the hook-and-loop fastener.
3) For rear wheels with quick-release axle: Remove the rear wheels (see Page 18).
4) Fold in the backrest (see Fig. 33):
→ Pull the backrest cable until the locking mechanism releases.
Voyager Evo
30
32
Usage
Ottobock | 21