Usage; Techniques For Using A Wheelchair - Otto Bock Voyager Evo Instructions For Use Manual

→ Attach the rear wheel to the quick-release axle housing and release the button on the quick-release axle.
→ The quick-release axles must not be able to be removed after the pushbutton has been released.
2) Fold down the backrest (see Fig. 3):
→ Pull the backrest cable until the locking mechanism releases.
→ Fold the backrest to the rear until the locking mechanism engages on both sides.
3) If necessary: Attach the side panels (see Fig. 4):
→ Slide the side panels into the side panel mountings (see Fig. 5, item 1).
→ In doing so, ensure that the mounting plate is up against the side panel from the outside (see Fig. 5, item
2).
4) If necessary: Fit the seat cushion. The seat cushion is secured against sliding by being pressed on to the
hook-and-loop fastener (see Page 16).
5) If necessary: Secure the back padding. The back padding is secured against sliding by being pressed on to
the hook-and-loop fastener (see Page 16).
6) If necessary: Fasten the calf strap to the frame tube above the caster attachment device (see Page 15).
2
4

6 Usage

6.1 Techniques for Using a Wheelchair

INFORMATION
Please also read the safety instructions in section 3.3 prior to operation.
Information and practical tips on fundamental techniques for using the wheelchair can be found in the brochure
"Techniques for Using a Wheelchair" supplied with the product.
Should the brochure not be included with the product, it can be ordered under order number 646D60. Further
information on obtaining the brochure can be provided by the qualified personnel supplying the wheelchair or by
Ottobock Service (addresses: see back inside cover or back cover).
Voyager Evo
3
5
Usage
Ottobock | 13