Otto Bock Voyager Evo Instructions For Use Manual page 17

17
Removing from Back Upholstery
1) Remove the seat cushion.
2) Fold the seat pad forwards away from the hook-and-loop fastener (not illustrated).
3) Pull the back padding up and off the hook-and-loop fastener on the back upholstery and remove it (see
Fig. 18).
4) After cleaning:
→ Put the back padding back on. Place the kink in the back padding at the top. The "V" in the padding (see
Fig. 19, item 1) shows exactly where the kink is.
→ Pull the back padding flap tightly downwards (see Fig. 20).
→ Pull the part of the flap that can be fastened forwards and fasten tightly to the seat upholstery (see Fig. 21,
item 1).
INFORMATION: The part of the flap that can be fastened prevents sliding or falling through the
gaps between the straps and protects against draughts.
5) Fasten the seat pad (see Fig. 16) and the seat cushion.
18
20
Voyager Evo
19
21
Usage
Ottobock | 17