Table of Contents
Advertisement
If the coprocessor does not appear in the list, continue with the "Verifying AIX
Software Installation".
Verifying AIX Software Installation
To verify that the device driver for the coprocessor is installed, do the following:
1. Log in as root user.
2. At the AIX command line, type:
lslpp -l devices.pci.14109f00.rte
3. Press Enter. Possible results are:
v If the coprocessor device driver is installed, text similar to the following displays:
Fileset
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Path: /usr/lib/objrepos
devices.pci.14109f00.rte 2.2.0.0
v If no data displays, the coprocessor device driver did not install correctly. Go to
v If you continue to experience problems with the software installation, call your
Running Coprocessor Diagnostics
Diagnostics are provided with the device driver software. If you must run diagnostics,
refer to your system documentation for instructions.
Level
Verify that the filesets devices.pci.14109f00.rte are at level 2.2.0.0 or higher. If
this information displays, but you continue to experience problems, go to
"Installing the Coprocessor" on page 13.
the appropriate software installation chapter, Chapter 2, "Installing the Device
Driver Software" on page 5 or Chapter 3, "Installing the Device Driver on the
RS/6000 SP System" on page 7, and then return to "Verifying Coprocessor
Hardware Installation" on page 14.
system support organization.
State
Description
COMMITTED Cryptographic Coprocessor
Chapter 4. Installing the PCI Cryptographic Coprocessor
15
Advertisement
Table of Contents
Need help?
Do you have a question about the PCI Cryptographic Coprocessor and is the answer not in the manual?
Questions and answers