PEA1G001
Figure 1. Installing the Adapter into the PCMCJA Slot
Preparing to Run the Diagnostics
Notes:
1.
For the latest information about preparing for the diagnostics
and running the diagnostics, see the README file on
Support Diskette #2.
2. The configuration file that is used for testing can also be used
to configure the IBM 5250 Express PC Card for some
emulation software. For more information, see "Special
Instructions for Configuring the IBM 5250 Express PC Card"
on page 25.
Before you can run the diagnostics, you must create a testing
configuration for the type of adapter that you are using. To create and
test the configuration that is used when running the diagnostics:
1. Insert your backup copy of Support Diskette #2 in the A: drive
and power on your PC. The 5250 Emulation Adapter Tests
screen, similar to the one shown in Figure 2 on page 10, appears.
Part 2. User's Guide 9