Seneca Z-KEY User Manual page 75

Modbus ethernet serial gateway and serial device server

Hide thumbs Also See for Z-KEY:

Table of Contents

USER MANUAL – Z-KEY

Used to Set the port baudrate

PORT #n BITS

Used to Set the number of bits for the serial communication.

PORT #n PARITY

Used to Set the port parity (None, Odd or even)

PORT #n RS485 STOP BITS

Used to Set the port parity (1 or 2; note that if the parity is set, only 1 bit can be used)

WEB SERVER PORT

Used to Set the TCP-IP port for the Webserver

WEB SERVER AUTHENTICATION USER NAME

Used to Set the User Name for accessing the Webserver (if User Name and Password are leave empty no

authentication is require for webserver access)

WEB SERVER AUTHENTICATION USER PASSWORD

Used to Set the Password for accessing the Webserver (if User Name and Password are leave empty no

authentication is require for webserver access)

FTP SERVER PORT

Used to Set the TCP-IP port for the FTP Server

FTP SERVER AUTHENTICATION USER NAME

Used to Set the User Name for accessing the FTP Server (if User Name and Password are leave empty no

authentication is require for webserver access)

Table of Contents

Need help?

Do you have a question about the Z-KEY and is the answer not in the manual?