Seneca Serial To Ethernet Connect; Installing Seneca Serial To Ethernet Connect Driver - Seneca Z-KEY User Manual

Modbus ethernet serial gateway and serial device server

Hide thumbs Also See for Z-KEY:

Table of Contents

USER MANUAL – Z-KEY

FTP SERVER AUTHENTICATION USER PASSWORD

Used to Set the Password for accessing the FTP server (if User Name and Password are leave empty no

authentication is require for ftp access)

WARNING!

REMEMBER ALWAYS TO CONFIGURE THE WEBSERVER AND FTP AUTHENTICATION USER NAME AND

PASSWORD FOR RESTRICT THE ACCESS TO THE FTP AND THE WEBSERVER. IF YOU LEAVE THE TWO

PARAMETERS TEXT BOXES BLANK NO AUTHENTICATION IT'S REQUIRED FOR ACCESS.

CAUTION!

If you are using Internet explorer 9 (or newer) you must enable the compatibility mode (see the arrow

below):

13.3.

Seneca Serial to Ethernet Connect

For using Z-KEY in remote serial com port mode you need to install in a PC the Seneca Serial to Ethernet

Connect software.

Seneca Ethernet to Serial Connect runs on windows vista™, windows 7™, windows 8.1™ and windows 10™.

Double click the installer:

Table of Contents

Do you have a question about the Z-KEY and is the answer not in the manual?