ACME SAMBA Color User Manual page 10

Tilt 2 Inverse
To select the Tilt 2 Inverse, press the ENTER button to show TILT 2 INVERSE on the display. Use the
DOWN/UP button to select the Yes (tilt 2 inversion) or No (normal) mode. Once the mode has
been selected, press the ENTER button to setup, to go back to the functions without any changes
press the MENU button again. Hold and press the MENU button for one second or wait for one
minute to exit the menu mode.
Lamp Inverse
To select the Lamp Inverse, press the ENTER button to show LAMP INVERSE on the display. Use
the DOWN/UP button to select the Yes (the leds will light up from right to left) or No (normal, the
leds will light up from left to right). Once the mode has been selected, press the ENTER button to
setup, to go back to the functions without any changes press the MENU button again. Hold and
press the MENU button for one second or wait for one minute to exit the menu mode.
Auto Test
To select the Auto Test, press the ENTER button to show AUTO TEST on the display and the unit
will run a self‐test. To go back to the functions without any changes press the MENU button again.
Hold and press the MENU button for one second or wait for one minute to exit the menu mode.
Temp.
To select the Temp., press the ENTER button to show TEMP. on the display. Use the DOWN/UP
button to select the Temp. 1 (the temperature of movable bars 1) or Temp. 2 (the temperature of
movables bar 2), press the ENTER button, and the display will show the temperature of the
movable bar. To go back to the functions without any changes press the MENU button again. Hold
and press the MENU button for one second or wait for one minute to exit the menu mode.
Fixture Hours
To select the Fixture Hours, press the ENTER button to show FIXTURE HOURS on the display and
the display will show the number of working hours of the unit. To go back to the functions without
any changes press the MENU button again. Hold and press the MENU button for one second or
9A